會員專區
帳號:
密碼:
 
我要註冊   忘記密碼
177020 人
訂閱電子報
請輸入您的E-mail
 
(取消訂閱, 請再次輸入信箱)
子聯盟
go 汽機車主聯盟
go 車燈
go 後視鏡
go 引擎
go 五金
go 剎車
more
Google Adsense
交流討論區 首頁 > 交流討論區 > 剎車
   
  歡迎,訪客 ( 請 登入註冊 )  
 
關鍵字查詢
 
 
 
 

剎車

 
  主題:認識車輛術語-Brake  
(一般會員)
悉辰
chen055175
IP: 發文時間:2009-06-10 10:29:03
會員圖片
03-0000000
電子郵件

BRAKE TRACTION CONTROL SYSTEM
Helps keep driving wheels from spinning during acceleration from a stop or during slow speeds by applying individual brakes to the slipping wheel(s).
FMVSS 135
The method used to verify engineering compliance of the hydraulic braking system used in light vehicle brake systems to the performance requirements specified in the Federal Motor Vehicle Safety Standard (FMVSS) No. 135 – Light Vehicle Brake Systems.
FMVSS105
The method used to verify engineering compliance of passenger car and light duty truck hydraulic brake systems with the performance requirements specified in Federal Motor Vehicle Safety Standard (MVSS) No. 105 - Hydraulic Brake Systems and Canada Motor Vehicle Safety Standard (CMVSS) No. 105 - Hydraulic Brake Systems.
Indicator Light Test
The vehicle test method used to confirm compliance of the brake system indicator lamp operation with the requirements specified in the Federal Motor Vehicle Safety Standard FMVSS) No. 135 – Light Vehicle Brake Systems, and to confirm design compliance of brake system indicator lamp operation with the requirements specified in Federal Motor Vehicle Safety Standard (FMVSS) No. 105 - Hydraulic Brake Systems and Canada Motor Vehicle Safety Regulation (CMVSR) No. 105 - Hydraulic Brake System.
Reservoir Capacity Test
The method used to confirm design compliance of dual hydraulic brake system reservoirs with the design criteria and labeling requirements specified in Federal Motor Vehicle Safety Standard (FMVSS) No. 105 - Hydraulic Brake Systems, or (FMVSS) No. 135 - Passenger Car Brake Systems and Canada Motor Vehicle Safety Regulation (CMVSR) No. 105/135 - Hydraulic Brake Systems.
Magazine Writer's Stopping Distance Test
The procedure that the magazine writer's have developed to be able to compare vehicles. It is a wet and dry road test where the stopping distance is measured while the vehicle decels from 60 mph to 0.
Balance Testing
This is used to perform an analysis of vehicles equipped with a mechanical proportioning valve to ensure the rear wheels go to a locked condition prior to the front wheels going to a locked condition.
Spike Stop Tests
This is used to evaluate the result of extreme forces being applied during a dynamic braking stop.
Center of Gravity (CG Tests)
The method to determine the 2-axis Center of Gravity for test vehicles.
TPM
Tire Pressure Monitoring
Michigan State Police
The test method to verify the performance requirements set forth by the Michigan State Police for lining life. Testing must pass the stringent requirements before any vehicle will be considered for the Michigan State Police.


--------------------------------------------------------------------------------------------------

 
 
 
 
    
 
 
廠商專區
百竤股份有限公司